CS-0010-01K Supplies Kit+ 1 Set of 29 Castle Stone Molds (10 S.F.)+ Free Shipping
FREE SHIPPING WITHIN THE CONTINENTAL USA...
AND DISCOUNTED SHIPPING TO ELSEWHERE IN THE WORLD!
THAT'S 10 SQ. FT. OF MOLDS TO MAKE 10 SQ. FT. OF STONE PER POUR!
This kit includes all material needed to make hundreds of square feet of stone, except for the concrete mix and water. No special equipment, experience, or skills are required to make beautiful custom-colored stone for your project - - JUST FOLLOW OUR SIMPLE INSTRUCTIONS.
Many of the project photos on our websites were done by first-time users of our molds. Each mold can be used hundreds of times if cared for and used properly. Our molds are made with .060 H.I. industrial ABS plastic for strength, flexibility, and durability, and are designed to last through hundreds of pours if cared for per our simple instructions.
These Castle Stone molds also make great stepping stones and cobblestones for a walk or patio. (See photos) All molds are 1.5" deep and make a stone 1.5" thick, or they can be poured thinner if used for 1/2" veneer or tiles. Each full set poured yields ten square feet of stone!
For interior wall applications, you can use Plaster of Paris and be done in a fraction of the time it takes concrete to cure!
YOU RECEIVE A TOTAL OF 29 MOLDS...
IN THE FOLLOWING SIZES AND QUANTITIES:
- Three each 12"x12"
- Five each 6"x6"
- Two each 6"x12"
- Five each 4"x6"
- Two each 8"x16"
- Three each 2"x12"
- Two each 4"x12"
- Five each 2"x6"
- One each 8"x8"
- One each 4"x4"
If you need additional molds, they can be purchased elsewhere in our store, by clicking on the appropriate category of mold desired. Complete FREE instructions are included with your purchase, and additional information is available on our www.TheMoldStore.info website as well.
THE COMPLETE DIY PROJECT KIT INCLUDES:
- 1 set of 29 Olde Castle Stone Molds. (10 square feet)
- 8 oz. Professional Water-Soluble Mold Release Concentrate (Makes 2.5 Qts. of Release)
- 2 Quarts StoneKote Brick and Stone Sealer
- 5 lbs. Concrete Colorant (1 Brown, 1 Harvest Gold, 1 Red, 1 Yellow, 1 Black)
- 8 oz. Special Premix Concrete Fortifier/Additive.
- FREE SHIPPING within the Continental USA! Or DISCOUNTED SHIPPING elsewhere in the world!
We ship immediately upon receipt of payment.- - - WHAT ARE YOU WAITING FOR?
We thank you for your interest in, and consideration of, our products. If you have any questions not answered here, we are only an email away. Just email: Help@Oldeworld.com
View All 2 Reviews
Write A Review
The product does not simply pop out of the form. I use Pam to keep it from sticking, yet it requires softening the sides of the mold, then dropping it mold side up onto something solid a few times to loosen molds. Instead of a vibrating table I use a 10 inch hand held buffer that I run under the table that holds my filled molds. Do not use to wet a mix or the larger pieces will break apart. It is best to leave them in the molds for two days before de molding. Product result is excellent. I'm making nearly 900 square feet.
Using Pam is why it may not "pop out" of the molds. Follow instructions and mix thickness recommendations for five-star results. Remember that it takes at least 2 weeks for 80% strength... not two days. :-)