ODF-#04 - 13 Flat-Face Stackstone Molds+ F/S

SKU ODF-04

 

FREE SHIPPING within the Continental USA! Discounted shipping elsewhere in the world.

 

Basically, we deduct the average USA shipping cost from the actual foreign shipping cost, and only charge our foreign customers that difference. That has been part of our shipping policy since 1992.

 

 

Here are thirteen (13), "Olde Drystack Flat-Faced Stackstone" concrete veneer molds. 

 

  

You can make a custom-colored, standard, medium, or light-weight, Olde Drystack Flat-Faced veneer stone with these molds.  Each was cast from actual  stones.  These molds come in five individual sheets, or sets. Set #1 has 12 concrete moulds, #2 has 15 molds, #3 has 12, #4 has 13 concrete molds, and #5 has 20 molds.  The stones in each sheet will cover about six square feet of area on average without duplication if you flip the set upside down once.   The complete 72 mold set will then cover about 60 square feet+/- using this method in two pours.  Each mold is about 1" to 3' deep, with the heights and widths varying, as did the original stones that the molds were taken from. The stone molds are separated prior to shipping to help protect them during transit and to assist you with the pouring process.  Complete FREE instructions are included with each mold purchase.  And any additional questions will be answered via email, should you have any. Some of the stones have been mounted against each other to speed up your installation and so you can fill one larger mold that has multiple stones joined together. We suggest that you use different colors within each stone cavity so the stones still look like individual stones when completed. 

 

 

The stone wall in the photo on the left has additional larger stones added in by the designer, for interest.  These are not part of the Stackstone set you may be purchasing.  Similar square and rectangle stones are available in our Olde Castle Stone style of molds.  They come in a number of different sizes, and are available elsewhere in our store.

 

  

We offer seventy-two (72) different and unique Olde Drystack Stackstone molds in these five sets.  If you purchase all five of the sets together you save $100.00.  You can make thousands of Drystack stackstone with these molds!

 

 

This Stackstone blends perfectly with our Drystack Ledgestone Mold Sets as well.  So if you have a very large project, you can blend with them, and even our Limestone Molds so you have even less duplication.

  

PLEASE NOTE: The stones in the photo of the solid Stackstone wall are very tight to each other due to slightly cutting or grinding down the sides to make them more flush with each other. The stones made with these molds will have a slightly larger spacing due to the side angle... as much as 1/4" between each stone. This is so the stones can be de-molded easier, and so they will blend with the Drystack Ledgestone sets of stones in a mixed wall. If you desire very tight layers of stone, you may want to grind the sides down a bit to achieve this. This can be done easily with a composite masonry blade in a circular saw, or trim them with a wet saw to get them to fit tighter. This should only take a minute to do on each stone.

 

Each individual mold can be used hundreds of times, so you will be able to make thousands of feet of stone for pennies each... saving about 90% off of normal retail pricing.  You can use common bags of premix Sand Mix found in all building supply stores, or mix your own Portland cement and sand to save even more money on very large projects. Then just follow our simple coloring suggestions and finishing techniques to make your own hand-made, professional quality, custom manufactured stone.

 

The molds are made with .060 high-impact ABS plastic for long life and flexibility, and is the standard for the casting industry. Molds can be used hundreds of times.

    Your Price $99.95
    Quantity
     

    Customer Reviews


    Write A Review