FREE SHIPPING WITHIN THE CONTINENTAL USA...
AND DISCOUNTED SHIPPING TO ELSEWHERE IN THE WORLD!
(We deduct the average USA shipping cost from the actual foreign shipping cost, and only charge the customer that difference for shipments outside of the Continental USA.)
Thick enough to be used for a packed sand and gravel driveway! These Hexagon Paver Molds are a heavy-duty commercial grade ABS that can be used hundreds of times if cared for properly. They offer a nicely textured Slate finish on their face, and come with automatic spacers on the sides.
For larger projects or to make more pavers faster, we also offer larger sets of molds to save you money, and they include FREE SHIPPING within the Continenatl USA.
We also offer Complete DIY Project Kits that include molds, color, and all supplies needed except the concrete and water. See these elsewhere in our eStore.
These 6 Hexagon Paver Molds measure 8.5"x8.5"x2.5" thick, and can made in any color concrete you can imagine. And you can drive a truck over them!
In the photos with this listing are a number of different stained pavers as well as a photo of the Paver as it comes out of the mold in plain gray concrete. Examples of Stained Pavers illustrated are in Patina, Red, and TerraCotta Stains as well as plain Gray concrete.
Our paver molds, like our stone molds, can be used hundreds of times, if cared for per our simple instructions. We have hundreds of different styles, sizes, textures, and shapes of molds to choose from. If there is something you'd like that you do not see in our store, let us know. We may be able to make it for you.
We normally recommend that most tiles be poured to 1/2" thick, but they can be poured thicker, depending on the depth of the mold. Our pavers are normally poured to their full thicness... especially if being used for a driveway. You can custom finish them, and make them in virtually any color that you can imagine. So you can use these thick paver molds to make thinner patio pavers of 1.5" or tile at 1/2" thick as well.
These pavers make great Garden Edgings around flower and vegetable beds, and for and to line garden walks, paths, patios, etc. They are thick enough, and will be strong enough to be used as driveway pavers over a prepared and compacted sand base as well.
Our molds are made with .060 H.I. rubberized ABS plastic for long life and hundreds of pours. They are self-supporting, so need no shell to hold them up like some of the cheap polystyrene molds available elsewhere. Molds are cut down from master sheet prior to shipping for ease of use during pouring and de-molding, and to further protect them during shipping.
Remember... FREE instructions are included with each purchase, and help is only an email away. Feel free to email your questions to: Help@Oldeworld.com We'll get right back to you with an answer or solution. Thank you for your interest in our products.