YOU CAN MAKE BEAUTIFUL, HAND-CRAFTED AND COLORED STEPPING STONES WITH THE MOLDS PICTURED... FOR LESS THAN $0.35 PER SQUARE FOOT!
AND YOU CAN START NEXT WEEK!
The "HOW TO" process is so simple... virtually anyone can do it!
It's like making a cake! But no oven is needed!
1. Lubricate the molds... a light vegetable oil will do if you don't have mold release.
2. Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in.
3. Add some concrete color, which is optional… unless you want just plain gray.
4. Pour mix into molds… vibrate a bit to compact concrete and release air bubbles.
5. Let the filled molds sit a day or so, undisturbed… over-night is fine.
6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold!
That is obviously a simplified version of the process, but it is that easy.
And FREE instructions and email support are included with each purchase.
We are proud to say that ALL of our products and the raw materials used in them, are
MADE IN THE USA
Our molds are designed and manufactured by us in Florida since 1992!
WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE... WE ARE YOUR SOURCE!
YOU ARE PURCHASING A LOT OF FOUR (4) 18"X18" THICK, NATURAL SLATE-FACED, STEPPING STONE AND PAVER MOLDS. THICKNESS (DEPTH) VARIES FROM 1-3/4" TO 2-3/4" DEEP. MAKE CUSTOM, HAND-CRAFTED FLOOR TILE, PAVERS, GARDEN STONES, STONE VENEER, AND STEPPING STONES... FROM 1/2" TO 2-3/4" THICK! THESE MOLDS WERE TAKEN FROM NATURAL BLOCKS OF TEXTURED SLATE, AND HAVE THE UNEVEN TEXTURE AND SIDES INHERENT IN THIS BEAUTFUL STONE.
THESE PHOTOS ARE OF THE SAME STYLES OF MOLDS BEING OFFERED. THEY VARY SLIGHTLY IN SIZE AS REAL STONE DOES. IF YOU NEED JUST ONE OR TWO MOLDS, SEE OUR INDIVIDUAL MOLDS IN THIS STYLE THAT RANGE FROM 1-3/4" THICK TO 2-3/4" THICK ELSEWHERE IN OUR STORE.
OUR COMPLETE SET OF FOUR MOLDS CONSIST OF #1818-SL-A, #1818-SL-B, 1818-SL-C, 1818-SL-D.
YOU CAN ACTUALLY MAKE THE STONE TO GO ON THE OUTSIDE OF YOUR HOME, FIREPLACE, WALLS, ETC., OR MAKE PAVER STONES FOR YOUR WALK, PATIO, POOL DECK, OR DRIVEWAY WITH THESE MOLDS. WE WILL GIVE YOU FORMULAS FOR BOTH REGULAR AND LIGHTWEIGHT STONE IF DESIRED. THIS STONE IS AROUND OUR CASTLE, WHICH IS RENTED AS A VACATION RENTAL IN MURPHY, NC.
Much of the tile and stone pictured in our photo listings was recently manufactured by purchasers of this or other styles of our molds, who had no previous experience making concrete tile or stone veneer! Our molds are made from .060, hi-impact, polystyrene, or industrial ABS plastic, and can be used hundreds of times if cared for properly!
NEVER DONE THIS BEFORE? IT'S REALLY EASY! NO KILN NEEDED EITHER!
COMPLETE INSTRUCTIONS ARE INCLUDED WITH EACH PURCHASE!
SHIPPING INFORMATION - PLEASE READ
We normally ship from our Port Charlotte, Florida shipping facility daily. Orders are shipped via either UPS or USPS. Orders are normally ready within a day of receipt of payment. The rest of the time it takes to get to you is due to the carrier. Please allow sufficient time for transit before contacting our shipping department with questions about the whereabouts of your order. Please understand that it takes over a week "in transit" for packages shipped to the western USA. Figure ten days total. Please remember that UPS and other carriers DO NOT work on weekends... and once in a great while... we don't either! :-)
We provide you with instructions in the various techniques to achieve a custom colored tile or stone. But other than formulas for the basic colors in our brochure, you will have to experiment. We cannot give you the formula for a color that is "in your head". Color is somewhat "subjective". What you might refer to as a "pink" color, might be our perception of a "rose" color. Our "powder blue", might be your "light blue", etc., etc. For that reason, we can only give you some "base" color formulas. You will have to work on any changes from that formula to get exactly what you want as a finished color, as seen in your mind's eye.
Interested in starting your own business? Become an "Olde World Tile" Producer Today!
Since 1992, we've trained hundreds of entrepreneurs worldwide in how to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
SEE OUR OTHER LISTINGS FOR MORE MOLD STYLES AND SIZES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
For additional product information, tile and stone installation photos, and more... visit our extensive TheMoldStore and Oldeworld websites, or if you have questions, feel free to call or email us.