WE ARE PROUD TO SAY THAT ALL OF OUR PRODUCTS AND THE RAW MATERIALS IN THEM ARE
MADE IN THE USA
And our molds have been designed and manufactured in Florida by us since 1992!
NOW YOU GET FREE SHIPPING WITHIN THE CONTINENTAL USA, AND DISCOUNTED SHIPPING TO ELSEWHERE IN THE WORLD!
THEE COULD BE CALLED DRYSTACK OR STACKSTONE MOULDS...
WE CALL OURS "OLDE DRYSTACK FLAT-FACED" MOULDS
The "HOW TO" process is so simple... virtually anyone can do it!
It's like making a cake! But no oven is needed!
1. Lubricate the molds... a light vegetable oil will do if you don't have mold release.
2. Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in.
3. Add some concrete color, which is optional… unless you want just plain gray.
4. Pour mix into molds… vibrate a bit to compact concrete and release air bubbles.
5. Let the filled molds sit a day or so, undisturbed… over-night is fine.
6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold!
That is obviously a simplified version of the process, but it is that easy. And FREE instructions and email support are included with each purchase.
THE BEAUTIFUL WALL SHOWN IN THE PHOTOS CAN BE DUPLICATED WITH STONE MADE BY YOU... IN ANY COLOR YOU WANT...
EVEN IF YOU HAVE NO PREVIOUS EXPERIENCE MAKING STONE!
THIS LISTING IS FOR A SET OF TWELVE #ODF-01 MOULDS. WE OFFER TWO DIFFERENT SETS WITH 12 MOULDS ON EACH SHEET, AND ANOTHER THREE SETS IN THIS STYLE WHICH ARE SIMILAR BUT CONTAIN EITHER 13, 15 OR 20 DIFFERENT SHAPES AND SIZES OF STONES. EACH SET IS THE SAME PRICE. IF YOU HAVE A LARGER PROJECT, AND/OR WANT MORE MOULDS OF DIFFERENT SHAPES AND SIZES, VIEW OUR 72 MOULD LISTING IN OUR STORE... SAVE $100.00 ON THE ENTIRE SET OF FIVE SHEETS FOR A TOTAL OF 72 MOULDS.
EACH SHEET, OR SET OF MOULDS WILL COVER ABOUT 3 SQUARE FEET WITHOUT ANY DUPLICATION, DEPENDING ON SPACING. THE 72 MOULD SET COVERS ABOUT 15+ SQUARE FEET PER POUR. EACH MOULD IS ABOUT 2" DEEP, WITH THE HEIGHTS AND WIDTHS VARYING DEPENDING ON THE ORIGINAL STONE THAT THE MOULD WAS MADE FROM.
PLEASE NOTE: The stones in the photo of the solid Stackstone wall are very tight to each other due to slightly cutting or grinding down the sides to make them more flush with each other. The stones made with these molds will have a slightly larger spacing due to the side angle... as much as 1/4" between each stone. This is so the stones can be de-molded easier, and so they will blend with the Drystack Ledgestone sets of stones in a mixed wall. If you desire very tight layers of stone, you may want to grind the sides down a bit to achieve this. This can be done easily with a composite masonry blade in a circular saw, or trim them with a wet saw to get them to fit tighter. This should only take a minute to do on each. IT CAN BE DONE AS YOU DE-MOLD BY USING A BLADE OR KNIFE ON SOFT CEMENT.
This sheet of molds include the following sizes of molds, most of which will be cut into smaller combinations before shipping to make pouring and de-molding easier. Some of the moulds may be pre-joined together to make it easier to pour and fit during installation. They are nominally sized at: 3.5x11, 3x11, 3x11, 1.75x10, 3x11.75, 3x14, 4.5x10.25, 4x9.5, 1.75x10.5, 3x11.25, 3x11.3/4, 3.25x12
SAVE BIG $$$$ - MAKE STONE VENEER FOR AS LITTLE AS $0.50 A SQUARE FOOT OR LESS!
AND YOU CAN START PRODUCING STONE NEXT WEEK!
WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE, PAVERS, AND STONE FOR YOUR OWN USE... WE ARE THE SOURCE!
YOU ARE PURCHASING A SET OF TWELVE (12), ALL DIFFERENT,
"OLDE DRYSTACK FLAT-FACED" CONCRETE MOLDS.
YOU CAN MAKE CUSTOM-COLORED, HEAVY, MEDIUM, OR LIGHT-WEIGHT STONE WITH THEM.
REMINDER... YOU CAN PURCHASE THE ENTIRE SET OF FIVE SHEETS...
72 MOLD CAVITIES, FOR ONLY $399.99
...AND SAVE $100.00 OFF OF THE INDIVIDUAL MOLD SET PRICE!
These molds can be used hundreds of times if cared for properly. They are made with .060, high-impact, rubberized ABS for strength, durability, and flexibility.
Interested in starting your own business?
Become an "Olde World Stone & Tile" Producer!
Since 1992, we've trained hundreds of entrepreneurs worldwide to start and succeed in their own tile, paver, and stone manufacturing businesses! Our main business is mold design and manufacturing, so our success is truly dependent on your success!
SEE OUR OTHER LISTINGS, OR VISIT OUR STORE FOR MORE MOULD STYLES AND SIZES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
For additional product information, tile and stone installation photos, and more... visit our extensive Oldeworld.com websites or if you have questions, feel free to email or phone us.