We are proud to say that ALL of our products and the raw materials used in them, are...
MADE IN THE USA
Our molds are designed and manufactured by us in Florida!
AND NOW... FREE SHIPPING WITHIN THE CONTINENTAL USA, AND DISCOUNTED SHIPPING TO ELSEWHERE IN THE WORLD!
YOU CAN MAKE STONE LIKE THAT PICTURED...
FOR AS LITTLE AS $0.30 PER SQUARE FOOT!
The two pallets of stone in the photo below were made with three bags of Portland cement, (about $8.00 a bag), and equal just over 112 square feet of lightweight stone, to be used on the castle pictured.
YOU CAN START PRODUCING NEXT WEEK!
The "HOW TO" process is so simple... virtually anyone can do it!
It's like making a cake! But no oven is needed!
1. Lubricate the molds... a light vegetable oil will do if you don't have mold release.
2. Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in.
3. Add some concrete color, which is optional… unless you want just plain gray.
4. Pour mix into molds… vibrate a bit to compact concrete and release air bubbles.
5. Let the filled molds sit a day or so, undisturbed… over-night is fine.
6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold!
That is obviously a simplified version of the process, but it is that easy. And FREE instructions and email support are included with each purchase.
WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS? OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE? WE ARE YOUR SOURCE!
YOU ARE PURCHASING A SET OF 29, (10 SQ. FT.), OF "OLDE CASTLE STONE" CONCRETE MOLDS TO MAKE CUSTOM-COLORED, LIGHT-WEIGHT STONE WALL VENEER... OR THICK STEPPING STONES OR STONE TILE FLOORING.
AND NOW YOU GET FREE SHIPPING WITHIN THE CONTINENTAL USA! (Discounted elsewhere)
The ten different mold sizes (in inches) are, 2X6, 2X12, 4X4, 4X6, 4X12, 6X6, 6X12, 8X8, 8X16, and 12X12. There are multiples of some sizes of stone to balance the pattern.
You get complete FREE instructions on how to make the stone too!
You get 29 molds that make a natural 10 sq. ft. pattern. We changed the pattern slightly from the photo illustration and added five molds to make the patterns use more adaptable. We can also supply you with colorant, sealers, mold release, etc. in our Store. All molds can be used to make from 1/4" thick to 1-5/8"+/- thick stone pavers, stepping stones, stone veneer for walls, and stone tile for flooring... depending on the thickness they are poured. We also make 2"X6" up to 18"x18", and everything in between in this style... See our other listings!
The small castle in the photo is being covered with this stone veneer. These molds can be used hundreds of times if cared for properly due to them being made with .060, high-impact, industrial rubberized ABS plastic for strength, flexibility, and durability.
INTERESTED IN HAVING YOUR OWN BUSINESS?
Become an "Olde World Stone & Tile" Producer Today!
Since 1992, we've trained hundreds of entrepreneurs worldwide in how to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
For additional product information, tile and stone installation photos, and more... visit our extensive TheMoldStore and Oldeworld websites.
quareTrade © AP6.0