SquareTrade © AP6.0
FREE SHIPPING FOR THIS LISTING!
MAKE CUSTOM, HAND-CRAFTED 4"x4" (1/4" to 3/4" thick) TILE WITH OUR INSTRUCTIONS AND MOLDS...
...FOR LESS THAN $0.03 EACH!
AND YOU CAN START IMMEDIATELY!
The "HOW TO" process is so simple... virtually anyone can do it!
It's like making a cake! But no oven is needed!
1. Lubricate the molds... a light vegetable oil will do if you don't have mold release.
2. Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in.
3. Add some concrete color, which is optional… unless you want just plain gray.
4. Pour mix into molds… vibrate a bit to compact concrete and release air bubbles.
5. Let the filled molds sit a day or so, undisturbed… over-night is fine.
6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold!
That is obviously a simplified version of the process, but it is that easy. And FREE instructions and email support are included with each purchase.
We are proud to say that ALL of our products and the raw materials used in them are...
MADE IN THE USA
And our molds are designed and have been manufactured by us in Florida since 1992!
WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE... WE ARE YOUR SOURCE!
YOU ARE PURCHASING A SET OF THIRTY-SIX (36) 4"X4"X3/4" +/- TILE MOLDS TO MAKE CUSTOM-COLORED, HAND-CRAFTED, FLOOR, COUNTER, AND WALL TILE... IN ANY COLOR YOU WANT!
(The photos illustrate the nine mold styles available)
PLEASE SPECIFY WHICH STYLE NUMBER YOU'D LIKE, WHEN ORDERING.
IF YOU DO NOT SPECIFY THE STYLE DESIRED ON YOUR ORDER... YOU WILL RECEIVE FOUR OF EACH OF THE NINE STYLES.
NO NEED FOR A KILN OR SPECIAL EQUIPMENT OF ANY KIND TO MAKE THESE TILES. ALL MATERIAL NEEDED IS AVAILABLE AT BUILDING SUPPLY STORES LIKE LOWES, HOME DEPOT, ACE, ETC. MAKE ANY COLOR OR COMBINATION...EVEN AN ANTIQUE COLOR EFFECT. PAINT OR STENCIL THEM... MAKE YOUR OWN DESIGNS! THESE MAY BE POURED FROM 1/4" THICK TO ABOUT 3/4" THICK, DEPENDING ON THE MOLD STYLE. YOU CAN EVEN IMBED A WIRE IN THE BACK AND USE AS WALL HANGINGS. USE AS A CORNER DOT WITH OUR #1200 AND #1121 TILES.
THE TILE YOU MAKE WILL LAST A LIFETIME!
EVEN USE PLASTER OF PARIS (instead of concrete) FOR INTERIOR WALLS.
ORDER AS MANY MOLD SETS AS YOU LIKE AT THIS PRICE!
SHIPPING IS FREE WITHIN THE CONTINENTAL USA!
THESE ARE THE MOLD STYLES AVAILABLE.
#932-Rosette - #933-Leather - #934-Diamond - #935-Olde Country - #936-Modern "X" - #937-Slate - #180-Poppy - #940-Grape - #0404-Cobble
Much of the tile, stone, and brick pictured in our photo listings was recently manufactured by purchasers of this or other styles of our molds, who had no previous experience!
THESE MOLDS CAN BE USED HUNDREDS OF TIMES IF CARED FOR PROPERLY.
COMPLETE "HOW-TO" INSTRUCTIONS INCLUDED WITH PURCHASE!
SHIPPING INFORMATION - PLEASE READ
We normally ship from our Port Charlotte, Florida shipping facility daily each week. Orders are shipped via either UPS or USPS. Orders are normally ready within a day of receipt of payment. The rest of the time it takes to get to you is due to the carrier. Please allow sufficient time for transit before contacting our shipping department with questions about the whereabouts of your order. Please understand that it takes over a week "in transit" for packages shipped to the western USA. Figure ten days total. Please remember that UPS and other carriers DO NOT work on weekends... and once in a great while... we don't either! :-)
We provide you with instructions in the various techniques to achieve a custom colored tile or stone. But other than formulas for the basic colors in our brochure, you will have to experiment. We cannot give you the formula for a color that is "in your head". Color is somewhat "subjective". What you might refer to as a "pink" color, might be our perception of a "rose" color. Our "powder blue", might be your "light blue", etc., etc. For that reason, we can only give you some "base" color formulas. You will have to work on any changes from that formula to get exactly what you want as a finished color, as seen in your mind's eye.
Interested in starting your own business?
Become an "Olde World Tile" Producer Today!
Since 1992, we've trained hundreds of entrepreneurs worldwide in how to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
SEE OUR OTHER LISTINGS FOR MORE MOLD STYLES AND SIZES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
For additional product information, tile and stone installation photos, and more... visit our extensive TheMoldStore and Oldeworld websites, or if you have questions, feel free to call or email us.