SquareTrade © AP6.0
FREE SHIPPING WITHIN THE CONTINENTAL USA,
AND DISCOUNTED SHIPPING TO ELSEWHERE!
MAKE HUNDREDS OF CUSTOM, HAND-CRAFTED 4"x4" (1/4" to 3/4" thick) TILES WITH OUR INSTRUCTIONS AND MOLDS...
...FOR LESS THAN $0.03 EACH!
AND YOU CAN START IMMEDIATELY!
The "HOW TO" process is so simple... virtually anyone can do it!
It's like making a cake! But no oven is needed!
1. Lubricate the molds... a light vegetable oil will do if you don't have mold release.
2. Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in.
3. Add some concrete color, which is optional… unless you want just plain gray.
4. Pour mix into molds… vibrate a bit to compact concrete and release air bubbles.
5. Let the filled molds sit a day or so, undisturbed… over-night is fine.
6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold!
That is obviously a simplified version of the process, but it is that easy.
And FREE instructions and email support are included with each purchase.
We are proud to say that ALL of our products and the raw materials used in them are
MADE IN THE USA
And our molds are designed and have been manufactured by us in Florida since 1992!
#0938-12 - Twelve 4x4 Square Daisy Design Tile Molds - You can make twelve tiles at a time by purchasing these twelve (12) individual 4"x4"x.75" Square Daisy Flower Design Molds for use in casting concrete or plaster tiles. Use for floors, walls, counter tops, corner dots with our #1121 and #1200 floor tiles, borders, trim, etc. These tiles will last virtually a lifetime as the color is intergral when you follow our Free coloring and finishing techniques and instructions. Our molds are made with .060 H.I. commercial rubberized ABS mold plastic for long life, and are designed to last through hundreds of pours.
WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE... WE ARE YOUR SOURCE!
YOU ARE PURCHASING A SET OF TWELVE (12) #0938, 4"X4"X.75" "DAISY FLOWER" PATTERN TILE MOLDS TO MAKE CUSTOM-COLORED, HAND-CRAFTED, FLOOR, COUNTER, AND WALL TILE... IN ANY COLOR YOU WANT!
The photo of the molds illustrate six (6) individual molds in sheet form. They will be cut into smaller multiples or individual molds prior to shipping. You will receive twelve (12) individual molds.
NO NEED FOR A KILN OR SPECIAL EQUIPMENT OF ANY KIND TO MAKE THESE TILES. ALL MATERIAL NEEDED IS AVAILABLE AT BUILDING SUPPLY STORES LIKE LOWES, HOME DEPOT, ACE, ETC. MAKE ANY COLOR OR COMBINATION...EVEN AN ANTIQUE COLOR EFFECT. PAINT OR STENCIL THEM... MAKE YOUR OWN DESIGNS! THESE MAY BE POURED FROM 1/4" THICK TO ABOUT 3/4" THICK, DEPENDING ON THE MOLD STYLE AND YOUR APPLICATION. YOU CAN EVEN IMBED WIRE IN THE BACK TO MAKE WALL HANGINGS.
THE TILE YOU MAKE WILL LAST A LIFETIME!
EVEN USE PLASTER OF PARIS, OR OTHER PLASTER (instead of concrete) FOR INTERIOR WALLS.
BELOW ARE JUST SOME OF THE OTHER MOLD STYLES THAT ARE AVAILABLE IN OUR STORE.
#932-Rosette, #933-Leather, #934-Diamond, #935-Olde Country, #936-Modern "X", #937-Slate, #180-Poppy, #940-Grape, #0404-Cobble, #0939-X-O Design... and MORE!
Much of the tile, stone, and brick pictured in our photo listings was recently manufactured by purchasers of this or other styles of our molds, who had no previous experience!
THESE MOLDS CAN BE USED HUNDREDS OF TIMES IF CARED FOR PROPERLY.
COMPLETE "HOW-TO" INSTRUCTIONS INCLUDED WITH PURCHASE!
Interested in starting your own business?
Become an "Olde World Tile" Producer Today!
Since 1992, we've trained hundreds of entrepreneurs worldwide in how to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
SEE OUR OTHER LISTINGS FOR MORE MOLD STYLES AND SIZES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
For additional product information, tile and stone installation photos, and more... visit our extensive TheMoldStore and Oldeworld websites, or if you have questions, feel free to call or email us.