ONE GALLON OF OLDE WORLD "GLAZEKOTE" HEAVY-DUTY DEEP GLAZE FINISH, STONE AND CONCRETE SEALER.
NEED MORE THAN A GALLON? LESS THAN A GALLON?
Order quarts or 5 gallon pails of GlazeKote Sealer from our Store and SAVE by clicking the link below:
#GLZ-128 - USE TO SEAL AND PROTECT STONE, TILE, BRICKS, COBBLESTONE, PAVERS, MAN-MADE, FAUX STONE, VENEER, CEMENT, CONCRETE, AND PLASTER. PROTECTION AND PROVIDES A "GLAZE" FINISH... WHILE DEEPENING THE BASE COLOR. GREAT FOR DRIVEWAYS.
PRODUCT DESCRIPTION: GlazeKote is a clear non-yellowing solvent-based concrete sealer formulated with acrylic copolymer resins and lightfast, permanent, and alkali proof pigments. It is designed to penetrate deeply, giving a long lasting, hard, decorative finish to concrete products. These products are resistant to salt spray, acids, alkali, water, ultraviolet rays, and wet or dry abrasions. The resin system, which combines silicone and acrylic resins, has a very high resistance to traffic. May be used on all colored concrete, to include: Stamped Concrete Coatings, Cool Decks, Pool Decks, Concrete Tennis Courts, Shuffleboard Courts, Driveways, and of course Olde World Concrete Tile and Stone products.
TECHNICAL DATA: Specific Gravity: 1.08, Gloss 60 deg. on glass: 75, Weatherometer G23F Type: 2000 hours+, Coverage: 250-400 sq. ft. per Gallon, Abrasion Resistance: 12.5 gram loss (Tabor), Hardness (Toukon): 12-1000 cycles, Flash Point: 100 degrees f., Glass Transition Temp: 50 Tg degrees, Moisture Vapor Permeability: ASTM 99-66, and ASTM G23F, Hurricane Force Water TT-C-555B on effect. Product meets or exceeds applicable Federal Standard T7-C-555B, and are HUD approved. Acceptable under standard 14-1, ASTM 99-66, and ASTM G23F.
HEALTH = 1 Slight - FLAMMABILITY = 1 Slight - PROTECTION = G Gloves and Glasses - REACTIVITY = 0 Minimal - Made in USA
APPLICATION AND CLEANUP
APPLICATION: Apply with brush, or roller. Roller should be solvent resistant phenolic core with nap of OE” or less. To help eliminate bubbles, saturate roller before starting. A second coat is always recommended, and should not be applied until the first coat is completely dry. This generally means waiting a minimum of 1-2 hours, however job site conditions and weather may cause this time to vary. Always apply a uniform coat to help eliminate bubbles. CLEANUP: Clean up with typical and accessible solvent-based materials similar to any that might be used for oil-based paint cleanup.
OTHER SEALERS AVAILABLE FROM OLDE WORLD:
StoneKote: A water-based penetrating sealer that does not alter the appearance of the substrate.
MatteKote: A water-based sealer offering protection with a glossy shine.
GlossKote: A water-based sealer offering protection with an deep, gloss shine.
WE ALSO OFFER OUR COLORANTS IN ONE-POUND AND FIVE-POUND BAGS. OR YOU CAN ORDER A SPECIAL "SET OF FIVE" CONSISTING OF ONE POUND, OR FIVE-POUNDS, OF EACH OF OUR FIVE BASE COLORS.
EXPLORE OUR STORE" FOR MOLDS, AND OTHER SUPPLIES.
Our molds are made from a special .060 H.I. industrial rubberized ABS and can be used hundreds of times if cared for per our simple instructions.
COMPLETE INSTRUCTIONS ARE INCLUDED WITH EACH PURCHASE.
Become an "Olde World Tile" Producer Today!
Since 1992, we've trained hundreds of entrepreneurs worldwide to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
SEE OUR OTHER LISTINGS AND EXPLORE OUR STORE FOR MORE MOLD STYLES AND SIZES, SUPPLIES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
For additional product information, tile and stone installation photos, and more... visit our extensive websites, or if you have questions, feel free to call or email us.reTrade © AP6.