FIVE GALLONS OF OLDE WORLD "GLOSSKOTE" GLOSS FINISH, STONE AND CONCRETE SEALER.
NEED LESS THAN 5 GALLONS?
Order quarts and gallons of GlossKote Sealer from our Store
#GLS-640 - USE TO SEAL AND PROTECT STONE, TILE, BRICKS, COBBLESTONE, PAVERS, MAN-MADE, FAUX STONE, VENEER, CEMENT, CONCRETE, AND PLASTER. PROTECTION AND PROVIDES A "GLOSS" FINISH... WITHOUT ALTERING THE COLOR.
PRODUCT DESCRIPTION: Olde World GlossKote Sealer is a water-based urethane/acrylic sealer designed for use on interior concrete floors and tile. It provides chemical and abrasion resistance and when cured, provides a sheen to the coated surfaces. It helps protect and prolong the color and appearance of the substrate. Olde World GlossKote provides resistance to UV and black rubber (heal) marks. This easy to apply, water-based, environmentally friendly formula cleans up with water. Top coating with Super-Sealer Wax is recommended.
APPLICATION: Apply to clean sound floors. Apply at a rate of 300-600 square feet per gallon. Cleanup with soap and water before material dries. Drying time will depend on temperature… usually oe to 2 hours. Apply two to three coats for best results, about 2-4 hours apart. Sealer may be applied to a damp or dry surface at temperatures about 50 degrees F. Apply with a sponge, “floating” the surface with the sealer. Apply in one direction, with the second coat in the other direct. (North-South, then East-West). Saturate tile, but do not allow it to puddle on tile surface
COVERAGE: Approximately 300-600 square feet per gallon depending on porosity of substrate. CLEANUP: Cleanup with water.
Olde World GlossKote Sealer beautifies brick, stone, cementitious tiles, and concrete. It is a water-based, urethane/acrylic sealer designed for use on interior concrete floors and tiles. This non-yellowing formula provides chemical and abrasion resistance, and when cured, provides a sheen to the coated surface. Provides resistance to UV and black rubber (heal) marks. It helps protect and prolong the color and appearance of the substrate from oil, sunlight, etc.
OTHER SEALERS AVAILABLE FROM OLDE WORLD:
StoneKote: A water-based penetrating sealer that does not alter the appearance of the substrate.
MatteKote: A water-based sealer offering protection with a glossy shine.
GlazeKote: A solvent-based sealer offering protection with an ultra-glaze, deep, shine.
EXPLORE OUR STORE FOR MOLDS, AND OTHER SUPPLIES.
Our molds are made from a special .060 & 093 H.I. ABS plastic and can be used hundreds of times if cared for per our simple instructions.
With our process, you can make one tile or stone per day, per mold. If you have a large project, you may want to consider ordering a quantity of molds based on the number of tiles or stone needed, and your work schedule. As an example... it would take you ten days to produce 100 square feet of tile, using ten (one-square-foot) molds, 20 days using 5 molds, etc.
COMPLETE INSTRUCTIONS ARE INCLUDED WITH EACH PURCHASE.
SEE SHIPPING CALCULATOR FOR YOUR SHIPPING CHARGES.
WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS...
OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE...
Become an "Olde World Tile" Producer Today!
Since 1992, we've trained over 200+ entrepreneurs worldwide to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
SEE OUR OTHER LISTINGS AND EXPLORE OUR STORE FOR MORE MOLD STYLES AND SIZES, SUPPLIES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
For additional product information, tile and stone installation photos, and more... visit our extensive websites, or if you have questions, feel free to call us at 941-624-5356 or email us.